With this comprehensive complete set you can now enter the fascinating world of electronics. It contains an Oxocard Connect and a breadboard cartridge as well as 96 electronic components with which you can build a variety of electronic circuits. With your purchase, you get free and unlimited access to nanopy.io's editor with a variety of scripts that you can transfer to your Oxocard Connect at the touch of a button. You will also find an electronics course with 15 experiments that show you step by step how to switch LEDs, connect a servo, create acoustic signals with a piezo and much more.

High quality microcontroller device with TFT screen, glass cover, joystick, USB-C, as well as revolutionary 16-pin cartridge slot.

The Oxocard Connect represents the next generation of small experimental computers. The universal cartridge slot allows ready-made or self-developed boards to be brought to life instantly by simply plugging them in. Each card comes with drivers and demo programs installed and automatically loaded and started when plugged in.

Each Oxocard CONNECT includes an Oxocard board with dual-core ESP32 chip, WiFi, 2 MB PSRAM, 8 MB Flash, USB-C, joystick, 240x240 pixel display, and access to the powerful NanoPy development environment editor.nanopy.io.

With the BREADBOARD you can quickly plug in your own circuits. A plug-in board with 17 rows is available for this purpose. Connections: two analog inputs, five digital ports,I2C, SPI, GND/V3.3. access to the 5V power source of the port. Red LEDs are attached to the digital pins. 5v can also be injected to power the Oxocard Connect without USB. Important: the circuits require 3.3V! (Requires an Oxocard CONNECT)

The AIR cartridge contains three sensors from the well-known manufacturer SENSIRION. The SGP41 is a MOx-based gas sensor that can measure volatile carbon compounds (VOC) and nitrogen oxides (NOx). The SCD40 is a photoacoustic sensor that can reliably measure CO2 levels in the range of 400-2000ppm. The SHT40 is a calibrated temperature and humidity sensor. This cartridge outshines many room sensors in terms of quality, while also scoring points for programmability with added flexibility. (Requires an Oxocard CONNECT)

ToF stands for "Time of Flight" and is a method for distance measurement using lasers. The used sensor VL53L5CX from STMicroelectronics is a 8x8 multi-zone sensor with which a 3d scanning with a total of 64 pixels is possible. The field of view is about 65° and the range goes up to 4m! With it you can measure distances, recognize hand gestures or even detect objects!

(Requires an Oxocard CONNECT)

With the VEROBOARD you can quickly solder your own circuits. A grid with 17 rows is available for this purpose. Connections: two analog inputs, five digital ports,I2C, SPI, GND/V3.3. access to the 5V power source of the port. Red LEDs are attached to the digital pins. 5V can also be injected to power the Oxocard Connect without USB. Important: the circuits require 3.3V! (Requires an Oxocard CONNECT)

Nur in Deutsch verfügbar.

Mit diesem Kurs durchbrechen wir die konventionelle, aufbauende Informatikbildung durch einen direkten Weg über fertige Beispielprogramme, die man sofort über Schieberegler anpassen und beobachten kann. Hierzu muss nichts programmiert werden. Erst danach werden in Schritt-für-Schritt-Anleitungen kleine Coding-Aufgaben umgesetzt. Die Ergebnisse scheinen zu Beginn etwas magisch, doch mit jeder Aufgabe lüften sich mehr Geheimnisse.

Das Buch enthält dreizehn Aufgaben aus den Bereichen Computergrafik und Physik, die anhand fixfertiger Programme zeigen, wie vielfältig und kreativ programmieren sein kann. Wir sehen unter anderem, wie man Feuer, Wasser, Schnellflocken, Bäume oder Würmer simulieren kann. Die inspirierenden Aufgaben laden zum Experimentieren ein und vermitteln auf dem Weg die notwendigen informatischen Grundkonzepte, wie sie an höheren Fachschulen heute gefordert werden.

Im Anhang findet sich zudem eine Einführung in die neue pädagogische Programmiersprache Oxoscript. Diese Sprache stellt eine vereinfachte Form der bekannten Python-Sprache dar, die speziell für Programmiereinsteiger*innen entwickelt wurde.

Für die Bearbeitung ist eine Oxocard Galaxy, Artwork oder Science erforderlich.

(176  Seiten)

With this special offer you get both new Oxocards for a special price.

Contains:

• 1 Oxocard-Set "Artwork"
• 1 Oxocard-Set "Galaxy"

Free NanoPy development environment with extensive examples incl. complete source code.

more info about the Oxocard Artwork

more info about the Oxocard Galaxy

Computer board with 12 sensor values, printed on two sides , ESP32-MCU with 2 MB RAM/ 8 MB Flash, USB-C adapter, sensors: temperature, pressure, humidity, VoC, eCO2, ethanol, light, infrared, frequencies, noise, 3D acceleration, five buttons, screen: 240x240 pixel 24bit full color display, about 2.6x2.6cm.

Contains:

• 1 circuit board printed on two sides
• 1 flat USB-C cable
• 1 USB-C to USB-A adapter
• 1 quick start guide
• 1 cardboard stand for assembly

Free NanoPy development environment with extensive examples incl. complete source code.

More info

Computer board, printed on two sides with decorative elements, ESP32-MCU with 2 MB RAM and 8 MB flash, USB-C adapter, acceleration sensor, loudspeaker, five buttons, screen: 240x240 pixel 24bit full colour display, approx. 2.6x2.6cm.

Contains:

• 1 circuit board printed on two sides
• 1 flat USB-C cable
• 1 USB-C to USB-A adapter
• 1 quick start guide
• 1 cardboard stand for assembly

Free NanoPy development environment with extensive examples incl. complete source code.

More info

Computer board, printed on two sides with decorative elements, ESP32-MCU with 2 MB RAM and 8 MB flash, USB-C adapter, acceleration sensor, loudspeaker, five buttons, screen: 240x240 pixel 24bit full colour display, approx. 2.6x2.6cm.

Contains:

• 1 circuit board printed on two sides
• 1 flat USB-C cable
• 1 USB-C to USB-A adapter
• 1 quick start guide
• 1 cardboard stand for assembly

Free NanoPy development environment with extensive examples incl. complete source code.

More info

• 1 Cardboard housing made of recycled cardboard
• 1 Inlay
• 1 OXOCARD-Circuit board with LiPo battery
• 1 Micro-USB-Cable

More information about Oxocard

The Gooseneck USB cable is a flexible swivel arm that allows the new Oxocard minis to be fixed to computers, monitors, USB chargers or powerbanks and positioned as desired. Adapter: 1 x USB-A, 1 x USB-C Length: 30cm Material: flexible metal segments with silicone coating

20 Oxocard sets, consisting of:

• Cardboard housing made of recycled cardboard
• Inlay of bioplastics (PLA)
• OXOCARD board with LiPo rechargeable battery
• Micro-USB cable

Additional Oxocard-Drybag (15L) with waterproof headphone connection and mobile phone cover (incl. carrying strap for hanging around)

• 10 Cardboard housing made of recycled cardboard
• 10 Inlay
• 10 OXOCARD-Circuit board with LiPo battery
• 10 Micro-USB-Cable

Learn how to program with the Oxocard

Tell the computer what to do: Should it display pictures, play melodies or send messages?

The Oxocard can be many things: piano, coloured lamp, clock or toy. You just have to give it the right commands. Try it out! (only available in german)

Compatible cards: Oxocard Blockly

Powerbank and power source for Oxocards. Charge: 5'000 mAh Connections: two USB-A and one micro USB connector incl. cable (USB-A <-> Micro-USB)

(90x62x12mm)

Dank der Trägheit unserer Augen können wir in der Nacht mit einer Taschenlampe einen Lichtschweif in die Luft zeichnen. Was mit der Taschenlampe funktioniert, geht auch mit der Oxocard.

Du lernst mit Licht zu zeichnen, von der einfachen Welle bis zum ganzen Text.

Kompatible Karten: Oxocard Blockly

Set of 3 replacement cardboard housings incl. 3 cover sheets (without inlay)

With this I2C hub, you can connect the Oxocard with additional GROVE-compatible sensors and actuators.

Currently, we support the functions only via our Python programming environment.

Detailed examples can be found here: http://www.tigerjython4kids.ch/iot

Here you can directly download the instructions

Compatible cards: Oxocard Blockly

Set of 10 replacement cardboard housings incl. 10 cover sheets (without inlay)

Wood inlay (plywood) lasered

15L-Drybag with Roboxo. With a pocket and waterproof 3.5mm headphone jack for your mobile phone. Incl. carrying strap.