LoraWAN Buttons

Oxobutton LoRaWan (EVALKIT)


Square Smartbutton

  • LoRaWAN 868 MHz (EU)
  • Bluetooth Low Power (BLE)
  • E-Ink-Display (200x200 pixels)
  • four buttons (9 operations)
  • Speaker
  • LEDs 4 x green, 4 x red
  • Accelerometer
  • Temperature sensor +/- 2 degree

Extensive configuration options using our app and through downlink message.

Infos

Quantity prices on request

CHF 110.00 incl. VAT



Buttonboard LoRaWan


The buttonboard is a robust smart button with six capacitive buttons. These can be labeled with a cover sheet of paper. The button has a high-quality finish and can be easily cleaned.

  • LoRaWAN 868 MHZ (EU)
  • Bluetooth Low Power (BLE)
  • 6 capactive touch buttons
  • 48 ultrabright multicolor LEDs
  • Speaker
  • Vibra-Motor
  • Accelerometer
  • Temperature-Sensor (+/- 2 degree)
  • Litium battery 2400 mAh
  • Replaceable cover print
  • MCU BLUENRG-2
  • Memory RAM: 24 KB, Flash: 256 MB

Extensive configuration options via app and downlinks. Infos

Volume prices on request.

CHF 110.00 incl. VAT



Replacement battery for the Buttonboard


  • CP405050
  • incl. soldered connector for Buttonboard
  • Capacity: 2500 mAh - 7.5Wh
  • Monocell - NOT recharchable!!!

CHF 14.90 incl. VAT



Oxocard

Oxocard (Mini) Science


Computer board with 12 sensor values, printed on two sides , ESP32-MCU with 2 MB RAM/ 8 MB Flash, USB-C adapter, sensors: temperature, pressure, humidity, VoC, eCO2, ethanol, light, infrared, frequencies, noise, 3D acceleration, five buttons, screen: 240x240 pixel 24bit full color display, about 2.6x2.6cm.

Contains:

  • 1 circuit board printed on two sides
  • 1 flat USB-C cable
  • 1 USB-C to USB-A adapter
  • 1 quick start guide
  • 1 cardboard stand for assembly

Free Oxoscript development environment with extensive examples incl. complete source code.

More info

CHF 89.00 incl. VAT



Oxocard (Mini) Galaxy


Computer board, printed on two sides with decorative elements, ESP32-MCU with 2 MB RAM and 8 MB flash, USB-C adapter, acceleration sensor, loudspeaker, five buttons, screen: 240x240 pixel 24bit full colour display, approx. 2.6x2.6cm.

Contains:

  • 1 circuit board printed on two sides
  • 1 flat USB-C cable
  • 1 USB-C to USB-A adapter
  • 1 quick start guide
  • 1 cardboard stand for assembly

Free Oxoscript development environment with extensive examples incl. complete source code.

More info

CHF 59.00 incl. VAT



Oxocard Mini Combo


With this special offer you get both new Oxocards for a special price.

Contains:

  • 1 Oxocard-Set "Artwork"
  • 1 Oxocard-Set "Galaxy"

Free Oxoscript development environment with extensive examples incl. complete source code.

more info about the Oxocard Artwork

more info about the Oxocard Galaxy

CHF 99.00 incl. VAT



Oxocard (Mini) Artwork


Computer board, printed on two sides with decorative elements, ESP32-MCU with 2 MB RAM and 8 MB flash, USB-C adapter, acceleration sensor, loudspeaker, five buttons, screen: 240x240 pixel 24bit full colour display, approx. 2.6x2.6cm.

Contains:

  • 1 circuit board printed on two sides
  • 1 flat USB-C cable
  • 1 USB-C to USB-A adapter
  • 1 quick start guide
  • 1 cardboard stand for assembly

Free Oxoscript development environment with extensive examples incl. complete source code.

More info

CHF 59.00 incl. VAT



Oxocard Blockly - Set


  • 1 Cardboard housing made of recycled cardboard
  • 1 Inlay
  • 1 OXOCARD-Circuit board with LiPo battery
  • 1 Micro-USB-Cable

More information about Oxocard

CHF 49.00 incl. VAT



Oxocard Blockly - 20-pack 10% plus free drybag!


20 Oxocard sets, consisting of:

  • Cardboard housing made of recycled cardboard
  • Inlay of bioplastics (PLA)
  • OXOCARD board with LiPo rechargeable battery
  • Micro-USB cable

Additional Oxocard-Drybag (15L) with waterproof headphone connection and mobile phone cover (incl. carrying strap for hanging around)

CHF 879.00 incl. VAT



Oxocard Blockly - Set in pack of 10


  • 10 Cardboard housing made of recycled cardboard
  • 10 Inlay
  • 10 OXOCARD-Circuit board with LiPo battery
  • 10 Micro-USB-Cable

CHF 441.00 incl. VAT



Oxocharger


Powerbank and power source for Oxocards. Charge: 5'000 mAh Connections: two USB-A and one micro USB connector incl. cable (USB-A <-> Micro-USB)

(90x62x12mm)

CHF 24.90 incl. VAT



Gooseneck-USB-cable


The Gooseneck USB cable is a flexible swivel arm that allows the new Oxocard minis to be fixed to computers, monitors, USB chargers or powerbanks and positioned as desired. Adapter: 1 x USB-A, 1 x USB-C Length: 30cm Material: flexible metal segments with silicone coating

CHF 8.90 incl. VAT



Oxocard - Teaching resources (german)


Learn how to program with the Oxocard

Tell the computer what to do: Should it display pictures, play melodies or send messages?

The Oxocard can be many things: piano, coloured lamp, clock or toy. You just have to give it the right commands. Try it out! (only available in german)

Compatible cards: Oxocard Blockly

CHF 26.00 incl. VAT



Oxocard - Lehrmittel: Lichtzeichnen


Dank der Trägheit unserer Augen können wir in der Nacht mit einer Taschenlampe einen Lichtschweif in die Luft zeichnen. Was mit der Taschenlampe funktioniert, geht auch mit der Oxocard.

Du lernst mit Licht zu zeichnen, von der einfachen Welle bis zum ganzen Text.

Kompatible Karten: Oxocard Blockly

CHF 20.00 incl. VAT



Set of 3 spare cardboard cases


Set of 3 replacement cardboard housings incl. 3 cover sheets (without inlay)

CHF 12.00 incl. VAT



i2C-Hub expansion port


With this I2C hub, you can connect the Oxocard with additional GROVE-compatible sensors and actuators.

Currently, we support the functions only via our Python programming environment.

Detailed examples can be found here: http://www.tigerjython4kids.ch/iot

Here you can directly download the instructions

Compatible cards: Oxocard Blockly

CHF 9.50 incl. VAT



Set of 10 spare cardboard cases


Set of 10 replacement cardboard housings incl. 10 cover sheets (without inlay)

CHF 28.00 incl. VAT



Woodinlay for Oxocard


Wood inlay (plywood) lasered

CHF 5.00 incl. VAT



Drybag Oxocard


15L-Drybag with Roboxo. With a pocket and waterproof 3.5mm headphone jack for your mobile phone. Incl. carrying strap.

CHF 19.90 incl. VAT